Smeg ALFA135BE Manual de instrucciones

Table of Contents 1. PRECAUTIONS FOR SAFETY AND USE _____________________ 19 2. INSTALLING THE OVEN __________________________________ 21 3. DE

Instructions for the User The display shows U Ct. Press START to display the cooking time. Press START or keep it pressed to increase the cooking

Instructions for the User 28 4.9 Rapid cooling The oven has a special function which allows its interior to be cooled quickly. To activate this fu

Instructions for the User 5. CLEANING AND MAINTENANCE Important: never point jets of water straight at the oven and do not use high-pressure

Instructions for the User 30 5.2 Cleaning the inside of the oven To keep the oven in good condition, it must be cleaned regularly at the end

Instructions for the User 6. EXTRAORDINARY MAINTENANCE Occasionally, the oven will require minor servicing procedures or the replacement of par

Instructions for the User 32 6.2 Removing the door Open the door completely and insert the pins (supplied) into the holes from the inside. Close

Introduction 1. PRECAUTIONS FOR SAFETY AND USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. TAKE GOOD CARE OF IT AND KEEP IT TO HAND THROUGH

Introduction THE APPLIANCE BECOMES VERY HOT DURING USE. OVEN GLOVES SHOULD ALWAYS BE WORN. THE NAMEPLATE WITH THE TECHNICAL DATA, SERIAL NUMBER AN

Instructions for the Installer 2. INSTALLING THE OVEN The oven is designed for free-standing installation on a horizontal work-top. It must be

Instructions for the Installer 22 In case of connection to the electrical mains by means of socket and pin, the connection must be completed with

Instructions for the User 3. DESCRIPTION OF CONTROLS START BUTTON Use this button to set the time when turning on the appliance for the first

Instructions for the User 24 4. USING THE OVEN 4.1 Precautions and General Advice When the oven is used for the first time, it should be he

Instructions for the User 4.4 Program selection This oven has 15 different cooking programs, including: 14 user-editable programs for fan-mode co

Instructions for the User 26 Press START to confirm the start of the program. The program starts, performing the preheating stage; the display show