Smeg UKS3C090P Manual de usuario descargar pdf (Pagina 11)

Problem Possible cause Solution

Water flows on the floor. The melting water outlet is

not connected to the evapo-

rative tray above the com-

pressor.

Attach the melting water out-

let to the evaporative tray.

The temperature in the appli-

ance is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower tempera-

ture.

The door is not closed cor-

rectly.

Refer to "Closing the door".

The food products' tempera-

ture is too high.

Let the food products tem-

perature decrease to room

temperature before storage.

Many food products are stor-

ed at the same time.

Store less food products at

the same time.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

The door has been opened

often.

Open the door only if neces-

sary.

If the advice does not lead to

the desired result, call the

nearest Authorized Service

Centre.

Replacing the lamp

The appliance is equipped with

a longlife LED interior light.

CAUTION! Disconnect the plug

from the mains socket.

1. At the same time, with the fingers

expand up and down the transparent

cover and unhook it in the direction of

the arrows.

1

2

1

2.

Replace the lamp with one of the same

power and shape, specifically designed

for household appliances. (the

maximum power is shown on the light

bulb cover).

3.

Reassemble the lamp cover.

4.

Connect the plug to the mains socket.

5.

Open the door.

Make sure that the light comes on.

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios