Smeg SI5952B Manual de usuario descargar pdf (Pagina 19)

Cleaning and maintenance

45

EN

Changes in colour do not affect the

operation and stability of the glass. These

are not alterations to the material of the hob

but just residues which have not been

removed and have then carbonised.

Shiny surfaces can form due to the bases

of pans, especially aluminium ones, rubbing

on the surface, and due to the use of

unsuitable detergents. They are difficult to

remove using conventional cleaning

products. It may be necessary to repeat the

cleaning process several times. Use of

corrosive detergents or rubbing of pan

bases can wear away the decoration on

the hob over time and contribute to the

formation of stains.

4.5 What to do if...

Below we provide a list of possible

solutions to some operating problems.

The hob does not work:

• Check that the hob is connected to the

mains electricity supply

• Check that the house's main circuit

breaker is on.

The cooking results are unsatisfactory:

• Make sure that the cooking temperature

is not too high or too low.

The hob smokes:

• Make sure that the food has not spilled

out of the pan and use a larger cooking

vessel, if needed.

• Let the hob cool down and clean it once

cooking is complete.

The hob circuit breaker or main circuit

breaker in the house's consumer unit are

repeatedly triggered (or corresponding

fuses blow).

• Call Technical Support or an electrician.

There are cracks or fissures in the hob:

• Turn off the appliance immediately,

disconnect the power supply and

contact Technical Support.

4.6 Error codes

In the event of problems, the display will

show an error code which identifies the

problem.

The following table lists the possible error

codes and the actions the user must

perform.

If the problem has not been

resolved or in the event of other

types of problem, contact

Technical Support.

Code Action

Press any hob key.

Contact Technical Support

and specify the error code.

Contact Technical Support

and specify the error code.

Contact Technical Support

and specify the error code.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios