Smeg A21A0XXAA Manual de usuario descargar pdf (Pagina 11)

Instructions for the user

5. USE OF THE COOKING HOB

5.1 Lighting the burners

Before lighting the hob burners check that the flame caps are in th

correct position and that their burner caps are in place, making sure tha

the holes A in the flame caps correspond to the spark plugs an

thermocouples.

The optional grid B is for use with “woks” (Chinese pans).

To prevent deterioration of the hob we have equipped the cooker with

raised pan stand C to be placed underneath pans more than 26 cm i

diameter.

The supplied reduction rest C is also used for small pans.

Each knob corresponds to the burner indicated. The

appliance is equipped with an electric lighting device.

To light the burners, press and turn the knob

anticlockwisetothelargeflamesymbol

. Keep the

knob pressed for about 2 seconds to let the

thermocouple heat up.

If the burner turns off when the knob is released, it means that the

thermocouple isn’t hot enough. Repeat ignition and keep the knob

pressed longer.

Once the burner has been ignited, the flame can be regulated as

required.

Always check that the control knobs are in the position (off) when you

finish using the hob.

If the burners turn off accidentally, a safety device will trip after about 20

seconds to cut off gas flow (even with the gas tap open).

1 2 ... 6 7 8 9 10 11 12 13

Sin comentarios

Smeg A21A0XXAA Manual de usuario Pagina 11