Smeg SE2640TD2 Manual de usuario descargar pdf (Pagina 11)

Use

37

EN

Switching on the triple cooking zone

1. After setting the maximum power or

(depending on the model), press the

Increase keys. On the display a

lighted dot comes on beside the power

setting to indicate that the inner cooking

zone or has switched on

(depending on the model).

2. Press the Increase key again to

completely activate the cooking zone.

On the display a lighted dot flashes

beside the power setting to indicate that

the entire cooking zone or has

switched on (depending on the model).

3. Press the Increase and Decrease

key to increase or decrease the

required power level.

Accelerator

This function can be used to reach the

selected heating level more quickly.

The cooking zones will start at maximum

power. Once the selected power level is

reached, power is reduced.

1. Press the Increase and Decrease

keys simultaneously for the cooking

zone to be heated using the accelerator

function. will flash on the display.

2. Using the Increase and Decrease

keys select a power level ranging

between 1 and 9 (also in double or

triple mode). The display alternately

shows and the power level just

selected.

If the Increase key is pressed

when the cooking zone is at the

maximum power or

(depending on the model), the

cooking zone deactivates ( ).

Heating times with active

function:

• Power level 1: 2 minutes

• Power level 2: 3 minutes

• Power level 3: 4 minutes

• Power level 4: 5 minutes

• Power level 5: 6 minutes

• Power level 6: 7 minutes

• Power level 7: 8 minutes

• Power level 8: 10 minutes

• Power level 9: 12 minutes

If no power level is selected within

5 seconds of activating the

accelerator function, the

cooking zone returns to normal

status.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comentarios a estos manuales

Sin comentarios