Smeg SEU304EMTB Manual de usuario descargar pdf (Pagina 16)

Use

18

Secondary menu

The cooktop is equipped with a secondary

menu that allows you to enable or disable

certain settings:

1 = Automatic control lock: in this mode,

one minute after the last action by the user

the control lock is automatically enabled.

2 = Showroom: in this mode, the appliance

turns off the heating elements and keeps the

control panel active (useful for in-store

demonstrations). Every minute, the display

shows for one second. To use

the cooktop normally, you must set this

mode to .

3 = ECO-logic (on some models only): in

this mode, the cooktop’s electronics

automatically adjust the power level in a

way which respects the maximum power

consumption limit set: 2.8 or 4 kW. To use

the cooktop at maximum power, you must

be set this mode to .

At first installation, within two minutes after

powering the cooktop, press and hold the

Plus and Minus keys of the first

cooking zone (next to the key).

The cooking zone display shows the

number of the setting currently being edited

(1 = Automatic control lock, 2 =

Showroom, 3 = ECO-logic) with its value

on the side ( : enabled, : disabled).

For example indicates that the

Automatic control lock is disabled.

Press the Plus or Minus keys to

change the setting of the or

values.

If the ECO-logic setting is changed, you

can select the following values (2.8

kW) (4 kW) (maximum

consumption). To advance to and change

the subsequent settings, press the

key.

if the cooktop is already installed

and in use, turn off the cooktop's

power. Turn the cooktop back on

within two minutes and proceed as

described above.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios