Smeg SEU304EMTB Manual de usuario descargar pdf (Pagina 15)

Use

17

EN

Timer (on some models only)

This feature allows you to program a timer

which emits an acoustic signal at the end of

the set time (1 to 99 minutes).

1. With the keypad turned off, press the

key. The display shows

the message to indicate you

can change the timer.

2. Press the Plus or Minus keys to

set the time of the desired timer (hold

down the keys to speed up).

3. At the end of the set time, the cooktop will

alert you with a series of beeps. To stop

the beeping, press the

key.

4. To disable the timer during the

countdown you must reset its value using

the Minus key. When the display

shows , the timer is disabled.

Overheating protection

If you use the cooktop at full power for a

long period, the electronics may have

trouble cooling down, especially when the

room temperature is high.

In this case, a device cuts the power to the

front cooking zones and the display flashes

and .

If the temperature of the electronic board

does not decrease, the device cuts power

to all the cooking zones and the display

shows (only on some

models).

When the temperature returns below the

safety levels, cooking can resume.

Other functions

If three or more controls are used

simultaneously or for a long time (for

example: when a pan is mistakenly put on

them or from a water spill), an automatic

device turns off all cooking zones (if turned on)

and the display shows the error .

Remove the cause of the error from the

keys.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios