Smeg SE2951TC2 Manual de servicio descargar pdf (Pagina 13)

Instructions for the user

6.6 Switching on a triple hot plate

To start heating a triple hot plate, after having set the maximum power level or (on some

models only), press button . A lighted dot will appear adjacent to the power to indicate the inside hot

plate has been activated ( or ); press button again to fully activate the hot plate. The dot

adjacent to the power will flash ( or ).

Press button or to increase or decrease the required power level.

If button is pressed when the hot plate is at maximum power, the hot plate will switch off ( ).

6.7 Accelerator function

This function can be used to reach the selected heating level more quickly.

The cooking zones will start at maximum power. Once the selected power level is reached, power is

reduced.

6.7.1 Activating the accelerator function

Press buttons and simultaneously for the zone to be heated using the accelerator function.

will flash on the display.

Use buttons and to select a power level between 1 and 9 (the cooking zone can also be

activated in double or triple mode). The display alternately shows and the power level just selected.

If no power level is selected within 5 seconds of activating the function , the cooking zone returns to

normal status.

Power level set with A Maximum time to

reach (min)

1 2

2 3

3 4

4 5

5 6

6 7

7 8

8 10

9 12

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Sin comentarios

Smeg SE2951TC2 Manual de servicio Pagina 13