Smeg SE2951TC2 Manual de servicio descargar pdf (Pagina 20)

Instructions for the user

8. TROUBLESHOOTING

PROBLEM POSSIBLE CAUSES SOLUTION

The hob does not work.

- The hob is not wired in or the main

switch is not on.

- There is a power failure.

- The fuse or the magnetothermal

switch of the appliance has blown.

- The sensor buttons are locked

(control lock).

- The buttons are partially covered

by a damp cloth, a liquid or a

metal object.

- Switch on the main switch.

- Check power supply.

- Replace the fuse or reactivate the

magnetothermal switch of the

appliance.

- Unlock the sensor buttons (control

lock).

- Remove the obstacle.

The results of cooking are

unsatisfactory.

- Temperature is too high or too low. - Consult cooking guidelines.

The hob smokes.

- The hob is dirty.

- Food has spilled onto it.

- Clean the hob once cooking is

finished. Let it cool first.

- Use a larger saucepan.

The error code E2 is displayed and

an acoustic signal is temporarily

heard.

- The touch control buttons have

been activated due to food falling

on the hob, saucepans or other

objects.

- Clean the surface or remove the

object.

An E1 - E3 - E4 - E5 error code is

displayed

- There is a technical fault. - Contact Technical Support.

The fuses or the magnetothermal

switch of the appliance are

repeatedly triggered.

- Call Technical Support or an

electrician.

There are cracks or fissures in the

hob.

- If cracks or fissures form, or if the

glass ceramic cooking surface

breaks, turn off the appliance

immediately. Disconnect the hob

from the power supply and call

Technical Support.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios

Smeg SE2951TC2 Manual de servicio Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Smeg SE2951TC2