Smeg SI321D Manual de servicio descargar pdf (Pagina 17)

Instructions for the user

7. TROUBLESHOOTING

PROBLEM POSSIBLE CAUSES SOLUTION

The hob does not work.

- The hob is not wired in or the main

switch is not on.

- There is a power failure.

- The fuse or the magnetothermal

switch of the appliance has blown.

- The sensor keys are blocked

(child lock).

- The keys are partially covered by

a damp cloth, a liquid or a metal

object.

- Unsuitable saucepans have been

used.

- Switch on the main switch.

- Check power supply.

- Replace the fuse or reactivate the

magnetothermal switch of the

appliance.

- Unlock the sensor keys (child

lock).

- Remove the obstacle.

- See "Saucepans suitable for use

in induction cooking" section.

The results of cooking are

unsatisfactory.

- Temperature is too high or too low. - Consult cooking guidelines.

The hob smokes.

- The hob is dirty.

- Food has spilled onto it.

- Clean the hob once cooking is

finished. Let it cool first.

- Use a larger saucepan.

The error code E2 is displayed and

an acoustic signal is temporarily

heard.

- The touch control keys have been

activated due to food falling on the

hob, saucepans or other objects.

- Clean the surface or remove the

object.

An E1 - E3 - E4 - E5 - E6 - E7 error

code is displayed

- There is a technical fault. - Contact Technical Support.

The fuses or the magnetothermal

switch of the appliance are

repeatedly triggered.

- Call Technical Support or an

electrician.

The saucepans in use are making a

noise.

- There is no danger to the hob or

the saucepan.

- This is normal with certain types

of pan.

The cooling fan continues to function

even after the hob has been turned

off.

- This is normal because the

electronics need to cool down.

Sounds can be heard as if something

is creaking or switching on.

- This is for technical reasons and

cannot be avoided.

There are cracks or fissures in the

hob.

- If cracks or fissures form, or if the

glass ceramic cooking surface

breaks, turn off the appliance

immediately. Disconnect the hob

from the power supply and call

Technical Support.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Smeg SI321D Manual de servicio Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Smeg SI321D